Monday, September 20, 2021

Rust In Peace: In Memory of Adam "Hooligan" Copeland.


                                                                  Adam Copeland
                                                          Family Man, Friend, Artist
                                                          (06/22/1979 - 09/20/2021)


 The bikelife and pinstriping universes came crashing down today as one of it's own went home to Jesus after fighting a two year battle with cancer. Adam "Hooligan" Copeland was a renowned pinstriper, kustom bicycle builder and owner/ founder of Patina Kustoms who's work was so original that when you looked at one of his bikes you knew it was his. His frames were one off pieces off art usually pieced together from old frames, both his frames and handle bars were built wildly with huge twists and turns. His pinstriping skills were fine crafted pieces of artisanship. 


Adam called his home Sacramento California where the bikelife kulture is heavily predominant. With events such as Sacramento Cycle Fest and OBC across the border in Las Vegas Nevada, it's easy to see how Adam worked his way into the culture and so quickly. (Pictured below with Bikelife and Kustom Bicycle Legend John Brain)




Adam always used the same pinstriping brush, it was old and the hairs all worn down, the brush was broken in half and was damn near down to the ferrule, but it didn't stop him from making some of the finest pieces of pinstriping art you've ever seen (The top panel below was a gift Adam gave to me as a personal thank you for helping him get to OBC a few years back when he was a little short on cash, it says "Keep On Sling'in", I will forever cherish this piece.)








Adam was a proud and beloved member of the Hooligans BC, he had been in a few clubs before he landed with Hooligans but once he threw on the leather cut with the large hand painted tiki face on the back he was down til' the day he left us.


He leaves behind his loving and supporting family as well as the countless number of friends and loyal customers worldwide who only wish nothing but love and healing to his entire family during this difficult and sad time. 






See yah later cowboy!

-Colin "Big Ray" Mulholland





Thursday, April 8, 2021

"Ba Da Bing!" An Interview with Jeff "Von Dago" Scozzaro By: Big Ray

 


2021 Marks the fifth year anniversary of when I got started in pinstriping, and I see that as a huge triumph especially with how far I have come. But when one man is just getting started, another man is stepping down. After 51 years Jeff "Von Dago" Scozzaro is retiring. I can only accredit a few people to my success over five years and Von Dago is the top name on that list. For all the years of quality products, his friendly customer service, his sage like guidance and advice, even his opinions on my work (even if it was hard to hear at times), these things make him the greatest mentor myself or anyone in pinstriping could have ever asked for. But what makes this man more than a mentor? More than a businessman? Simply put, the man gave me the shirt off of his back. Literally. Shortly after I had sent this interview to Jeff via email, I had found out that he was retiring. With this he was having a retirement sale on his website, so like the loyal customer of 5 years that I am I purchased a few brushes (Backups of my personal favorite the Mini Saber #0) and a T-shirt. Well it turns out the shirt I had ordered was actually out of stock! So when the package had arrived I was shocked to see the shirt I ordered was not included. But on the receipt, as is Jeff's M.O, he left a note stating as such with an apology. Now, I have been a customer with Von Dago for years, I am somewhat of a self proclaimed super fan. I have studied his catalog extensively and know just where to go every time I needed something (which usually is just my #0 Mini Saber). When I saw this shirt, I knew this wasn't of his stock. The art wasn't his but that of Pete "Hot Dog" Finlan, and it looked older and worn, and smelled of cigar smoke. The shirt size was XXL like I had ordered, but something more sentimental had reached my doorstep. This shirt had been worn by the man himself. The man had pinstriped in this shirt, and the sweat of his knowledge leaked into it. Staining it's fibers with the DNA of a pinstriper who's 50 years of expertise are needed if one wishes to strive in this industry. I'll say it again, the man gave me the shirt off of his fucking back. How many businessmen on Wall Street would do that for you? None. What makes Von Dago more than a pinstriper? More than a mentor? More than a businessman? He is a human being. A human being with compassion and respect for others. He would go out of his way to satisfy a customer by any means necessary even if that means pulling clothes out of his own wardrobe to do so.

Von Dago taught me two simple, but huge lessons throughout this interview alone: 1.) Be Professional, and 2.) Less is More. Jeff's compassion extends into how he feels. He will tell you like it is, not because he's an asshole, but because he's real and that's just who he is. If he doesn't think something is professional he'll tell you. When I tried to bring up past drama he shut it down (with concern for others involved because he is a true gentleman), when he thought questions I asked didn't have necessity, he told me (But with concern for my feelings because, again, he is a true gentleman). He does this because he knows you can't baby people, or be told that they are valid when they are in fact wrong (which is the climate we are living in these days...) A true mentor won't just teach you how to be an artisan of the craft, he will knock you on your ass with a reality check because that is what it takes to be a man. For years I have been told that my interviews were great and ask really great questions, but for the first time, through Jeff, I had to rethink everything I knew about interviewing. 


                                                                    (Thank You Jeff)


                                                                   ________________

1.) First and foremost thank you Jeff so much for taking the time to do this interview. It has been a true blessing to know you and have had the chance to talk with you personally on several occasions and to say I exclusively use your products. You and Fat Daddy Hagstrom have been like mentors to me, and it was a great moment in my life to have wowed you with the Grateful Dead panel I did over Instagram, on my birthday no less! Probably one of the greatest presents I would ever receive and it doesn’t have to collect dust in my garage lol.

Thank you so much - I'm truly humbled. 



2.) Where were you born and raised?

The great state of Pennsylvania & home to the multi time World Champion: "Pittsburgh Steelers" N.F.L. Football team.


3.) How old were you when you fell in love with Hot Rods and how long after that did you buy your first one? What was your first hot rod and how long after that did pinstriping and the art hit your radar? 

For as long as I can honestly remember, ever since I was a toddler, I loved "Cars" - Family photos & stories reflect that as well. I remember my Dad playing with me for hours with my cars! He used to race the famous "Hudson Hornet" stock cars back in the day. At 14, I bought a non-running bone stock, 1933 Willys Sedan. It was an old junker and I  worked and worked and worked on that car for a couple years. I learned a hell of a lot about old cars the whole time. I eventually sold it via Hemmings Motor News to a guy in Denver. I only paid $200. for it & put a couple hundred in it, and yet I sold it for $1,500. My dad thought the guy was "NUTS" to come from Denver Colorado, all the way to California and buy this old car in "Primer" for $1,500. from a KID, LOL! Now I had my drivers license by then and I bought one of those tiny 1957 Nash Metropolitans from a neighbor down the street for a mere $10. That also didn't run, lol. So with a buddy, we simply pushed it home to my house. I figured out what was wrong, and for $15. I ordered a New Distributor Cap, Spark Plug wires & Coil ~ Slapped that stuff on and 'Ba 'Da 'Bing ~ that car got me 39 MPG!!!! And this was when gas was only .25 cents a gallon. It was faded Powder Blue & White, which was way too Girly for me, so my friend the famous 1960's Top Fuel Driver: John "the Zookeeper" Mulligan, who lived across the street, helped me & showed me how to paint it GREEN, lol. The same color as their famous "Beebe & Mulligan" Dragster.....(I used to hang out at their race shop, go to Lions Drag Strip with them Etc. But that's another story entirely...lol) I sold the Metro after a while, then bought a '62 Ford Falcon. First thing I did was paint it "Green" and did my 1st "Flame Job" on it (looking back at those photos, it was soo freaking hideous lol) I dumped A LOT of money into that car! - Dragged raced the hell out of it, and even though It had a 6 cylinder in it, it performed so well at Lions, Irwindale & Orange County Raceways, that I caught the attention of Jack Clifford who owned a company called: Clifford Research 6 = 8. They made specialized racing performance parts just for 6 cylinder motors and he started sponsoring me. Damn did that car ever run fast & sound soooo good. Before I ever opened the hood anywhere, people just assumed it had a V-8 motor in it lol. Sold the Falcon, then bought me a "GREEN" 1969 Plymouth Roadrunner which eventually became my famous May 1976 Hot Rod Magazine cover car called: "the Street Freak" I'm blown away by it's 4 decade long popularity. I'm constantly being "tagged" by people over it on Facebook and It's always being talked about on the 70's Muscle car pages and the several "clone" attempts and copy cat cars that's been attempted impress the hell outta me. That particular cover of Hot Rod magazine also made their special edition book of: "the Best of Hot Rod Magazine"  and another special edition called: "the 1st 50 years of Hot Rod Magazine". My biggest thrill though is when a toy company even made a little 1/64 diecast car of it about 3 years ago! Needless to say, that's one car I truly wish I'd never have sold. I've always had the "paint bug" in me so to speak. When I was in Jr. high school I entered a Candy Apple Red model car in a contest & it won "Best Paint". All through high school is where I really started to take off with my body work & painting abilities. Then of course I continued to follow through with it in the body shop course at College.


                                             
                                              (Jeff's Hot Rod Cover Feature from May 1976)



4.) Your first big shop was “Jeff’s Place” that opened in 1969, It was so successful that not only did you have day and night shift workers, but in 1982 a jealous competitor burned it down. To this day do you know or have any idea who it was or might be? And if yes are you allowed to speak it? What was the feeling you had after that happened? Did you struggle for awhile or was it pretty quick to get back on your feet? 

My biggest competitor in Anaheim California at the time was Vinnie Bergman who owned a shop called: "Kolor Me Kustom"  THAT'S who burned my shop down. He was eventually caught, prosecuted, and was sent to prison for awhile. It was an extremely weird feeling after that happened and took me quite awhile to get over it emotionally. About the same time, a very little known local Disneyland machinist and hobbyist home Hot Rod builder named Boyd Cottington hit me up to be his painter, at what was about to eventually became the Hot Rod Industry icon of: "Hot Rods by Boyd". But I turned him down! (I was kinda Burned Out, lol, No pun intended) Because I wanted to take some time off from painting, and since I was old time car club buddies with Tom McMullen, he gave me the opportunity to become a Magazine Editor & Photographer for McMullen Publishing. They made the magazines: Street Rodder, Trucking, Custom Chopper and a few more. I also freelanced my work with Peterson Publishing, who made: Hot Rod Magazine, Car Craft, Motor Trend, Off Road 4wheel drive, Etc, Etc. I enjoyed the hell out of doing the magazine gigs, buttttt after a few years of doing it, I got a 'Lil bored & the custom bug just kept nipping at me, along with so so many people constantly wanting me to paint something, Etc, Etc... So I opened my my own custom shop once again. & never looked back.

(Von Dago outside his old shop "Jeff's Place" mid to late 70's)


             (Vinnie Bergman, Owner of Kolor Me Kustom and the man who burnt down Jeff's shop)


5.) You have done work for Motley Crue, Sylvester Stallone and Elizabeth Taylor. In the 60 amazing years of service to the community (which we all thank you for) has there been anybody you wish you could have worked with, or have done work for?

I kinda do have 2 regrets of some business decisions I made. Looking back, I've always wondered if I made the wrong decision when I turned down George Barris, when he hit me up to paint Farrah Fawcett's Corvette for her (via him) because he said I couldn't lay claim to painting it, since she came to him & he wanted to sub-contract it out to me! So I told him "fuck off". Looking back, I would have photo proof to back my claims of saying it today lol. And when I turned down the Yankee Major League baseball player Reggie Jackson, when he hit me up to paint all of his Hot Rods "FOR FREE" just because he was "Reggie Jackson"....so you can imagine what I told him....lol  But, looking back. Hmm. Was that a mistake??? Ohhhh welllll.......lol


6.) In 1993 a good friend of yours Dave Whittle respectfully dubbed you “Von Dago”. One of the questions I’ve always wanted to ask is one that seems rather odd but it does hold some wonder especially in the climate we’re living in these days. Has there been anybody, Italian or otherwise who has been offended by the “Von Dago” name? 

OH HELL YEAH... (Laughing My Ass Off!!!)


7.) You have stated during the 70’s Van Craze in America that you were invited to be on the Johnny Carson program. This little factoid has always fascinated me. Just the sheer brilliance of his comedic talent, to this day cannot be denied. What year was your Johnny Carson appearance? How were you contacted to do his show and what went through your mind after being invited? What was the experience like before the show and when you were live? Did you get to meet Johnny before the show and if yes what was he like?

It was in the 70's at the height of my popularity & business fame. I had a Public Relations firm on retainer that arranged that gig. It was perfect timing because of the extreme popularity of the Van movement. Exactly when, I honestly don't recall, as with soo many other little details of what we did, who we did it for and when, Etc. Etc. We contacted his organization a few years ago & they graciously tried to locate & pinpoint the actual air date / show, video, etc. based on all the information I could give them, but ultimately they couldn't because back then shows were on "Tape". Unfortunately, as we were told, somehow & nobody knows why, but the tapes of every show of every year was not even saved originally and some got lost during office moves, some naturally deteriorated, destroyed, Etc. That's a real bummer, trust me! First we had to have a few meetings with the staff & finally his producer Fred DeCordova  to discuss the exact nature of what we were going to do, in showing Johnny HOW to Airbrush a van mural, Etc. I think it was about 3 Months before the actual tapping of the show. The show was taped way earlier in the early evening with his guests than when it was broadcasted, and  because of the special nature of what we were going to do with Johnny, we (and the Van) had to be there very early in the morning because of all the preshow set up - rehearsals, etc. It was fun, exciting, fascinating & yet crazy! The first & foremost thing they were concerned about was Johnny's safety of course. We did several goofy rehearsals with a staff member, because like I said, there is soo much to it. All the boring stuff of: Placement of me, a little work table & the Van during the commercial break, Timing, Lighting, Sound, Camera locations, shots, etc... It was all so much of a blur because of all of that stuff. It took all dang day!!!! Although Johnny knew ahead of time what was going to happen on his show, when it finally happened, it was totally, totally fresh & new to Johnny. We never met before (or after) the show. This way, his reactions & comic remarks were 100% off the cuff & that way much more real when we did it together, and of course very funny!!!!

("Baby Face Dago" Early 70's)


8.) Within the past few years you have been able to use social media to your advantage, and it seems like your popularity only continues to grow. For a long time you operated solely off Facebook, and I remember that you were always commenting on people’s posts. Frequently messaging others and myself about new products or even just to say Hi, give positive criticism or let people know about their order status. You are one hell of a business man. But it’s this business mindset that makes us feel like we’re more than customers, it makes us feel like we’re your friends and that keeps us coming back and loyal. You haven’t got a mean bone in your body, towards your loyal customers or even your critics. Has this always been the mindset you have had towards fans, customers, and rivals?

ABSOLUTELY!!!!! First off, I am - who & what I am...and I'm only being ME. There's No special magic to it. No special education to do this. I'm merely doing what I do best. I'm now running my Brush Business like I did my famous custom paint shop Jeff's Place in the 70's. and my Custom Sign shop in the 80's and my Hand Pinstriping business in the 90's ''n 2000's. I simply treat people as I want to be treated....to me, the key word here is "people". We are all from the human race. We are all Americans. Yes, I own the business & Yes, you are the customer ~ but guess what? Bottom line is: We are each "people", who have jobs, homes, family's, kids, pets, bills, etc. etc. But, without "people", which equates to Happy Customers, then you'll have NO BUSINESS. I didn't always have a job. I did the marriage gig (in my case 3 times...lol) I had the 3 kids, sent them to college, had homes, cars, pets, bills, Etc. So I know what's it's like! I wasn't always well known or considered famous. I've been there!!!! Thus, I can relate because I have never forgotten "my roots" I am a Pinstriper FOR Pinstripers - Period.


9.) While we're on the subject of divorce, I have always noticed a trend in our culture of guys going through the same thing. Ed Roth was divorced multiple times, the same with Dutch, even me on a personal level has struggled with marital strife because of my art (luckily not divorced but boy there were some bad days...) Is divorce so common in our culture because of the long hours we put in to be better at what we do, is it the fact that we become a little hardened by the crowd we choose to run with, is it the stress of finding success, or is it simply that wives cannot stand when we spend so much money on shit they "think" we don't need? HAHA! But, from your own experiences, is there anything you can say to us younger artists that could maybe steer us on a better path in our marriages? 


I believe the women just flat out can't handle the constant stress & struggles of the economy based "ups 'n downs" we face being in a "Luxury" trade. Meaning what we do is a public WANT - not a need..... People WANT custom painting. They don't need it. Thus, we are like & based with the stock market. When the economy is good, we make GREAT money. When the economy takes a dive, so does our income. Because nobody WANTS what we do when they are unemployed, nor can they afford it. So it gets pretty damn tough sometimes, let me tell 'yas! But that's where saving for a rainy day comes in lol. It's hard to do sometimes, but it absolutely has to be done & you must be diligent about it. That, and being able to "sell" any Antique Gas Pumps and Signage you've accumulated over the years - or even your beloved '40 Ford two door sedan if you have to! lol. Because when it comes to eating regularly, you gotta do - what you gotta do! And by the looks of me, you can tell that this boy LIKES TO EAT ! 😁



10.) California seems to be a glorious place for the hot rod community, the sun and the beach and all that jazz. But there is a dark side to it, my wife originally being a born native has told me allot about the competitive nature of the state. In 1992 you left and “never looked back at California again!” Is it fair to say that this competitive nature was a factor in your leaving? And since your departure do you feel your best work has been achieved?

Yes, yes, yes & yes! lol. But there wasn't any business competition. In fact, quite the opposite. Bobbo Dunn was right down the street from me. Him and I worked together on a lot of projects. In fact, he eventually had ME pinstripe all of HIS customers cars for him lol. I even signed "his name" on them lol. It was a win-win. He dealt with the customers. All's I did was pinstripe the car & got paid. Bobbo never missed a beat painting the high volume of sign jobs he had, 'Ba 'Da 'Bing. I had so much work, I also subbed out quite a bit to both Bobbo & Dave Whittle. And there were some other guys who subbed out some specialized work to "me", that either they couldn't do, or didn't have the time to do. I didn't care one bit. Why? Because we are Professionals!!! Heck, there was plenty of work / customers to go around, so that wasn't a factor at all. It was the high crime, high cost of living, the disgusting Graffiti everywhere, the freaking brown skies everyday from "Smog", and finally the straw that broke my back was the L.A. Riots after the Rodney King crappolla. As far as my performing my best work since leaving California?  ~ That's a yes & no answer. I had some GREAT years in Southern California, and some GREAT years in North Idaho. I can honestly say I have no regrets & no complaints about my decision to make the move.


11.) Your skin canvas was pretty empty in your younger photos, when did you decide to go full on with your tattoos, how many do you have, and what are they? Did it suck for you or did you handle it well?

I got my 1st tattoo at 17. Then started getting a few here 'n there in the 70's. Long story short of the late 80's early 90's, I kinda took a wrong turn in my career by getting sucked in with some Hell's Angles & other clubs that I was painting for, and started going "nuts" over getting Inked. Plus, during that same time period, I did all the signs for the World Famous Tattoo shop in Los Angeles called "Sunset Strip Tattoo" on Sunset Blvd. Thus, we worked out some trades lol. That's where I met the guys in the rock group "Motely Crue", "Guns 'n Roses", "Brian Setzer", Etc. I currently have full sleeves from my wrists up to my shoulders & onto a Dragon on my chest. Getting a Tattoo simply feels like a bad sun burn. It's no biggie. (other than when they stick that needle directly over a "bone" - then it's Yeeee Haaaaa time!) 



12.) American Graffiti is one of my favorite movies! (Both 1 and 2, I’m such a fan of Milner’s I have and wear every night to bed my “Milner’s Racing Team” shirt haha!) Your resume includes work on cars from that movie, as a fan of that movie and of yours I would love to know which ones you did. 

I only did the Maroon Merc. The one they only used for the "close up" with actor shots. They had about 2 or 3 others that were used for the stunts & driving scenes. Same with the other main two cars as well. The yellow Coup & black '55 Chevy. They also had stunt doubles lol. The owner of that Original Merc then had us paint it Candy Purple with Lime Green Candy Flames & was called: "The Green Flame"(within a one inch stripe on the car in the Purple, we saved a portion of the original maroon color) That car got a little more fame when the esteemed automotive kulture artist (and former Big Daddy Roth T-Shirt painter back in the day) - Robert Williams, put the car on his famous poster of: Von Dutch, Ed Roth, George Barris, etc. building some famous custom cars & hot rods, welding, painting flames, etc. That poster is now one hell of a collectors item.

(Bo Hopkins as Joe "The Pharaoh" from American Graffiti. This may or may not be the car Jeff Painted, but it gives you an idea of what he did.) 


13.) As stated before I use your products exclusively. I am a big fan of the Mini Sabers because I like a stiffer synthetic brush for pinstriping as opposed to the softer squirrel hair brushes. These brushes also work best with acrylic paint, and when my lung health got bad I didn’t want to quit pinstriping so I looked for an alternative and your brushes were what I got. When did Mack first approach you to do a signature series and how long after did you start the Von Dago Pro Series website?

I believe it was about 2013 when they approached me. And 2014 when the 1'st line of brushes was released. The vondago.com website was started in 2015


                                             (The official logo for Von Dago's Pro Series)


14.) You have the best customer service bar none. Each package is stuffed full of goodies besides what you purchase as well as personally written messages. The majority of your items are free shipping but when certain items are charged for shipping you have a guarantee that you will refund us for it. This happened to me once. You sent me two whole dollars. I was shocked! I didn’t expect straight up cash to be in my order let alone to have you personally send it. Along the way, did you see people not getting their moneys worth from other people’s products which made you in turn want to be better as a salesman?

That's exactly why! You nailed it buddy. As I previously said: I am a person too. I'm also a consumer. That's not so much about being a salesman, but more with just plain being HONEST with people AND giving them their moneys worth. Thus, once again: "I am a Pinstriper FOR Pinstripers"



15.) Did you ever get the chance to meet Von Dutch or Ed Roth? If yes what were they like, and how did they individually impact your life?

Ohhh absolutely. I've met them & lucky enough to party with them on two occasions. Dutch was a hoot. Ornery as all get out lol. Ed was just plain "cool". They influenced me like so many others just because of who they are & what they did.



16.) In your career you have also done some work for Hot Rod Magazine, Street Rodder, and Car Craft doing photography. Were there any notable works of yours that can still be found from this time?

Yeah, but I guess you'd have to buy the magazines now on places like eBay or see them in a guys garage if they have a decent collection (like some of my friends do)


17.) Besides your passion, what do you do in your spare time. How does Von Dago live when he puts the brushes down and walks through the front door when the day is done?

Well after having a hell of a fantastic 51 year career, I have finally finally RE-tired from any kind of painting, lettering or pinstriping!!!! BUT I really don't have any "spare time" now, because I am on the road traveling this beautiful Country of ours in my Motorhome pulling a Cargo Trailer, and running the Brush Business out of it as well. After all, every city has a Post Office lol. So maybe you can say in my spare time, I travel the Countryside.


18.) When did you decide that you were finally ready to retire? What was the factor that made you look at everything you've done and say "Yupp, I think I'm ready to walk away"?

I was kinda semi retired 2 yrs ago & only made the official "retired for good" public announcement last year, but the last 5 yrs leading up to that, I found myself taking longer and longer to pinstripe a vehicle or other projects such as Coke Machines, etc. I was realizing that personally, I just wasn't getting "Jazzed" over working anymore. Don't forget, I've been doing this EVERY DAY, 5 - 6 and sometimes 7 days a week for over 50 years!!! It was weird, because I did indeed feel a sense of burn out. As I was pushing 70 years old, not only was my body physically wearing down, but I was also mentally wearing down. I actually worked WAY longer than I should have, but I felt so appreciative & dedicated to my long term 30 year loyal customers, car dealerships, body shops, etc. But yet, as you keep getting older, things start to change. Both physically & mentally. Plus, at the same time, I was excited to be having my own line of brushes & it was (and is) fun to work on them.



19.) Before Von Dago has to put down his brush for the last time and God calls you home, What would you like to tell the next generation of pinstripers, Kustom builders and painters?

All I ask of & suggest to this next generation is to have a decent set of Morals. Be honest with their customers AND most importantly "yourself". Put in the long hard hours of sacrifice & especially "Practice" in order to learn to be the very very best you can be, Respect & honor the Old Timers in this craft. And brush your teeth before going to bed every night.


20.) Jeff, the process of doing this interview has been a real emotional moment for me but overall a real pleasure. Now that it’s over, all I can say is god bless you for everything you have done and continue to do. As a loyal supporter your impact on me will last my lifetime, and I will be proudly carrying on your name til' kingdom come. Thank you!

Aww shucks, I am truly Humbled my friend. And dog gone it - you've made me do my famous "Blush"



Please be sure to check out Von Dago's official website: VonDago.com to help support him while he's living it up on the highways and backroads of this great nation.



HAPPY TRAILS!


Thursday, February 25, 2021

Fat Daddy Shares a Donut: An Interview with Mark "Fat Daddy" Hagstrom By Big Ray

  


 One of the greatest pleasures in my five years as a pinstriper has been getting to know who Mark "Fat Daddy" Hagstrom is. The man is a rockstar to say the least, I say "to say the least" because saying he's a "rockstar" just doesn't do him enough justice. For thirty plus years the "Donut Boy"  himself has been killing it, not only has he received social media and word of mouth notoriety,  he has also been graced with the title "Licensed Rat Fink Artist", the highest of all honors in the kustom kulture community. Fat Daddy is one of the biggest allies to this community, with many years of amazing knowledge and advice that he is eager to give. This interview holds a huge place in my heart being Mark has been a mentor to me, even without ever meeting him in person I can still say his art and his generosity continue to inspire me every time I pick up my brush. This introduction was so hard for me to write because I didn't want to write it. The interview speaks for itself and I am just eager to share it with you without my ramblings getting in the way. So without further ado, I give you Mark "Fat Daddy" Hagstrom:




1.) First off, thank you Mark, for taking your time to do this interview. This interview means a lot to me being as I see you as a mentor. I hope your wife and daughter are safe and doing well. How have you been during this crazy time?  


“Thank you Colin,  it is my honor to be asked to share with you and others. My family are all doing well, healthy and happy!” 


  

2.) I also must apologize in advance that my Bucs beat your Packers for the Super Bowl spot. My brother is such a fan of the Packers that literally on the first Tampa touchdown he threw his phone on the ground and it bounced up and broke the giant flatscreen at my parent’s house. My only response was “I guess we’re going to the super bowl dad” LOL.  


  “Well, I accept your apology my brother…hahahaha. I am a huge Packer fan; win or lose. Those athletes are amazing to watch. No Superbowl this year, but we will hope for next year!!! Go Pack Go!!” 


  

3.) When did you first get involved with the rodding/motorcycle community? And how long after did you first pick up a brush?   


  “I born in Chicago and lived there till I was 11 years old, I lived just four blocks away from "Whitey's Pit Stop & Chopper Corner." I would go there every weekend to see the cars and bikes! I was amazed at the paint jobs, colors, and pinstriping work! The guys that worked there would laugh when I was there drooling at those rides. They would sometimes give me stickers for my radio flyer wagon! Hahaha…I was hooked!! My Dad was an excellent mechanic and loved cars and Harleys. And, as we grew up, my family became very much into building and rebuilding cars, bikes, and hot rods while I was focused on the paint and pinstriping! I have always been into art and drew cars with monsters driving them. It would end up being the mid 80’s before I would try pinstriping for the first time.” 


  

4.) How did you come to create that crazy awesome signature style of yours? I can only assume that you have some knowledge of symmetry as well as art theory to be able to make such sharp, edgy and well blended pieces. The way the colors compliment and blend with each other creates almost a neon light affect that I find to be so breathtaking. It’s a very Art Deco style, if we were to put a name to it.  


 “My signature style is called “Donut Boy” scroll style and it was a result of being bored with just doing the Von Dutch traditional hot rod style typically known as “Dagger Style.” I had been working in the scroll style too, and that’s when I had a happy mistake happen…LOL. I was working on a panel in Dagger style when I thought about putting some swirls and curls in the mix. I really liked the results! Continuing forward, I would also add the feather type tear drops shapes. I was inspired by Steve Chaszeyka, who is extremely prolific in scrolling style along with Steve Kafka and a few others. The “Donut Boy” name was coined by my friends as I love to eat donuts!! It’s common to see my studio desk with a donut somewhere near by!! As far as colors, I use 1 Shot Lettering Enamels exclusively and they offer a vast array of colors, which are easily mixed to create the vibrancy I love to work with. I also use 1 Shot products to enhance the life and brightness of my paint.” 

  


5.) While skimming your website, it started to make sense how your pinstriping pieces look so elegant. As of lately, you haven’t just been pinstriping but have actually done some pretty outstanding abstract painting. How long have you been painting like this? 


  “My styles and designs are always evolving!! As with any artist who practices constantly, you can’t help but grow. You must ALWAYS be willing to listen and learn from your peers. I get a great deal of info by studying the works of the masters of this craft, but I also study the works of the new guys and gals coming into the art. As far as my process to make a design, it all comes from my mind. My focus is to create a flow from top to bottom. I start by finding my centerline and add a teardrop shape to start the design and just let it happen. I believe there hasn’t ever been a line not recreated by an artist. I was once told by my mentor, Jack Lindenberger, that, “We all borrow from each other.” I don’t have formal training as an artist, so I consider myself blessed that I can produce a pleasing piece of art.” 


  

6.) I came to discover you through Jeff, aka Von Dago, who recommended you to me. You and Jeff are very close friends, and it makes sense that the both of you would become huge inspirations to me because of that fact. Not only that, but because of your guys’ art and because of your guys’ kindness. You guys took me under your wings even though you would never come to meet me in person and that truly means a lot to me. When did you and Jeff first meet and how did you become such great pals?  


  “I am honored to be in that position, Colin. We are just guys who LOVE this craft and want to share it with those who are like-minded. We are always here to help and answer questions and give humble advice. Von Dago…what can I say, he has been a very special brother to me for a few years now. I was first introduced to him thru his awesome brushes. I got a Pro Series 000 pinstriping brush and I immediately loved it and it became my weapon of choice. I wrote to him and expressed my satisfaction and I spent time getting to know him. He would later include me in his “tester” crew for his new products and would ask for honest feedback. I was deeply honored and humbled to participate! We grew even closer as he also became one of Krazy Paint’s partners. If you look into Jeff’s history in the art, you will find he owned and operated “Jeff’s Place” in southern California. His shop was one of the most famous paint shops for many years, having painted a vast number of vehicles for big time customers. Magazines showed his styles and he being highly sought after in the industry. I was surprised to learn that he was the paint shop that painted the famous “Denim Van” in the red, white, and blue flame job for a giveaway in Car Craft. Von Dago genuinely loves his craft and his 50 years spent trying and trying again to bring top quality “Tools of the Trade” to all us artists shows his dedication and his true character. Thank you, Von Dago for everything you have taught me, I will pass it along as you are doing.” 


  

7.) What were you doing before pinstriping and when you came to it, what were the first few years like for you? Did clientele come easy or was it a constant search for work?  


  "My life before becoming a full-time artist was owning and operating a trucking company. I started trucking in 1983 and hauled many products over the years from logs, general freight, steel, petroleum products and heavy haul, lowboy work. I successfully traveled over two million miles before I was diagnosed with sleep apnea which took me for a ride when I fell asleep at the wheel and ran off the road and launched down a 50-foot ravine. Thank God, He was with me and I received spinal/back and hip injuries which ended my driving career. I sold my company to my brother in law and sister and became the manager/dispatcher for their company which still runs successfully to this day. I am very proud of my trucking days. Being gone was never fun. I missed my wife and children greatly. But it gave the backbone of who I am today. When you own a business, if you don’t work it every day – holidays, weekends - you will never succeed. I put in over 24 years working up to 100 hours a week. During my trucking years, I had done lettering jobs on my equipment using 1 Shot Enamels. It was back in 1988 and my brothers and I loved our snowmobiles. They said, ‘Hey Mark, we want you to pinstripe our sleds.’ I was like, ‘I don’t know the first thing about that.’ I mean, I knew about pinstriping but not how to actually do the work. Back then, there were not any guys “sharing” the secrets of pinstriping. Just ask any of us who have been doing this pre-internet. You would ask a question, but no one would answer! I looked for books and finally found a book by John Hannukaine who would become my inspiration and would be the mentor that I never met. He, along with many other masters, were just starting to share some of their knowledge. I am grateful for that start. His book would give me enough info for paint, brushes, thinner, and muse to practice. He was the first to drill into me that if you are not willing to practice every day, it will be very hard to succeed. My advice is PRACTICE, PRACTICE, PRACTICE! My clientele has always come from word of mouth. Yes, I will tell you it is hard to get work. But patience, practice honing your craft and people will ask. Remember my friends, as artists, we each have a style or skills that someone needs and wants. With many artists to choose from, it will be the perspective customer who will like your style or not. Don’t be offended if they choose someone else. Be true to who you are in your art.” 


  

8.) What has been some of your most popularly requested work? 


  “My most requested art is my traditional hot rod, old school work, typically known as “Von Dutch” style. I also get highly requested for my style of Rat Fink art and Von Dutch flying eyeball art. Then, my “Donut Boy style” which continues to grow as more people follow my work. I also do my version of scroll pinstriping and my angular “Edge style” pinstriping which features using only straight lines in the design. It’s quite unique and I often use it in my Southwest Native American style.” 


  

9.) When did social media hit your radar as an idea to share your work? And how has it helped you reach the Kustom community?  


  “I first discovered “Pinhead Lounge” in 2003, I believe. It opened up the world of pinstripe artists around the country and abroad! I also started selling my art on Ebay at that time. That is where my customer following began to grow. Then, I joined Myspace for a short time till Facebook hit the scene. It was great to put faces with names and being able to talk shop with these guys was awesome. That’s really when the craft was shared along with ideas and different creations could be displayed. I am now on Instagram.com as/FatDaddyLines, on Pinterest.com as /FatDaddyLines, and on Facebook.com as /FatDaddyBrand, with a store on Etsy.com as /FatDaddyLinesDesigns.” 


  

10.) You have been passionately involved in the Krazy Paint panel jam for charity. How did you get involved with this charity and what’s your favorite thing about this panel jam? 


  “I was introduced to Krazy Paint by John “JC” Carollo, and Dave “Cooz” Cusimano. I was living in North Canton, Ohio and we were not aware of each other. Cooz was the one who saw me on Facebook and mentioned to JC, “We need to get this guy to come to the show.” I was then contacted by JC and added to the ranks. As Krazy Paint grew, the three of us were very involved and passionate about Krazy Paint with our focus on the ARTISTS! Without them…you have nothing. We continued to adjust, plan and get companies in the industry involved such as 1 Shot Lettering Enamels, Von Dago Brushes along with Mack Brush Co. These folks have been great partners and we are incredibly grateful to have them involved with making Krazy Paint one of the top Pinstriper Panel Jams in the world! Our motto is “KRAZY PAINT - Hot Rod Art for Kid’s Charity.” My job is artist registration and communications, and then at the show, I head up the custom artwork table where folks can bring items to be pinstriped or lettered! I love it. It gives me a chance to share with those customers what we are about and how all the money raised goes to kids in need.” 


  

11.) There’s a lot of competition in the community within the past few years, especially when it comes to the younger dudes trying to out-do the older pros, or the vets trying to stifle the progress of the younger guys who seek out their help. I’ve also noticed that there’s a lot of information the vets want to give these guys, but they just don’t want to listen. I was guilty of this when I first started out but have come to accept the wisdom of the older cats, but also have experienced the older pros trying to sabotage my progress because they want to stay the best. What do you think the problem is? If you could sit the community down and give them a pep talk what would you say? Our passion is a dying art that has been coming back to life in the past decade, but it will die if we don’t work together, how could that be achieved? 


  “This is a very sensitive subject and has a huge amount of opinions and connotations to work through. Sure, competition is always there, I personally don’t see my fellow pinstripers as competition, more as my peers, mentors, and where to get advice if I screw up…and believe me, we all have! That’s why pursuing quality lines and great design work along with proper color theory is what will set you apart. If you can only stick weld two pieces of plate together, does that make you a Master Welder? No, you need to know all the aspects of welding to be that Master. As far as guys trying to stifle someone’s work, good questions just mean they need to keep looking for answers. I am sad that if a vet does that to another artist it’s not cool. Still…there is no specific person to point the blame at. From my experience at Krazy Paint, where we see all levels of talent, there’s room in this industry for everyone to get along. Where we see problems is when a new pinstriper just getting started in this craft sets up a booth, prints business cards and T shirts, and presents himself as professional without knowing everything that can make them a Pro. Now, there are a few artists who rapidly learn the skills and understand color theory. But overall, there are a lot of pieces to this pinstriping puzzle. That’s where the vets come in with their experience. The conflict comes when new artists think they know it all. Remember the old phrase, ‘You don’t know what you don’t know?’ That applies here. This is not about ego. Yes, you need to be self- confident, but ego will slap you upside the head. Meaning if you start way too soon, you will get a bad name….and once that happens, you are done. I paint every day of the week! No joke, and I still wipe off lines when I know I can do better. Never be afraid to learn and wipe off your work if it is not good. You will gain more respect to do that than to paint a terrible piece of work and then show it on the internet and think that you are going to hear “great work”. Now that I have shared all that, we need to look at the harshness some vets may use. First off if you can’t take a critical assessment of your work, then question your own motives. These vets have dedicated their lives to pursuing top quality work that makes them proud. They are also looking to protect the craft. If they get cranky about someone’s attitude, it is because they have seen this before and watched it fail. Remember, when we practice this art, we are representing all of us in the pinstripe community. We all need to be patient, lose the egos and just learn and paint! That’s how it will continue. Share your love of the craft. All of us need to respect the craft, too. I am personally very cautious when I am about to paint on someone’s $80,000 Hot Rod, or even if it’s a $8,000 ride. 99% of the Pro artists only want to help the new pinstriper/artist to push themselves to achieve Pro quality. I have always said, if you would not pinstripe for free, then it’s just about money and not for the love of the art. I never charged a customer till I had been practicing for four years. I just wanted to do it, give my customer top quality and to do my best work. I believe the craft will continue to grow and we will not let the art die. I personally have seen over the many years I have practiced the art that of 50% of the guys who start never go past five years. They do it for the wrong reasons, but they have to ask themselves about that. Too many just look at this art as “beer money” and that’s not what the passion for the art is all about.”  


  

12.) When did you become an officially licensed Rat Fink artist to Ed Roth? That must have been one of the greatest honors of a lifetime to know you are up there with Ed himself as well as Newt. 


  “It is one of the highest, most humbling and honoring moments of my art career! However, I do not consider myself as being up there in this craft, more as a “Junior” in the craft and that’s why I practice so much. When my family moved to Northern Wisconsin in 1971, I did not have the opportunity to attend car shows. My dream would have been to have met Ed "Big Daddy" Roth! He was such an inspiration growing up drawing monsters and hot rods! I admired his vision and his art, and truthfully, I am STILL inspired by Big Daddy and his family! In June of 2014, I became a Roth-approved "Official Rat Fink Artist.” I love to support the Roth Museum in Manti, Utah, and I will attend a Rat Fink Reunion in person soon. Ed’s wife Ilene is an incredible lady and she continues on with sharing his artwork! “Thank you so much Ilene!” I love to collect model cars, Rat Finks, stickers, and Odd Rod collector cards!” 


  

13.) In the 30+ years as an artist, has there been anyone you wished you could have done work for, or to have worked with? 


  “Good question! I would have loved to just be around guys that I have followed and looked up to in their craft. I am so humbled by the fact I have worked alongside of MANY of my favorite artists and I have become great friends with them. I had the honor and privilege of painting alongside of my friend, Ryan Evans from Counting Cars, at different panel jams. He is a very cool and down to earth guy who loves the art as much as I do.” 


  

14.) What were some of the magazines that you were blessed to have been published in? 


  “I have had the honor of two features in the international magazine called “Pinstriping and Kustom Graphics,” one feature in “Speed & Chrome” and a feature as of this past month in the magazine “Rodding USA”. I am also proud to say that “JC”, owner of John Carollo Asociates did all the writing. He is a professional writer/photographer of NASCAR and motorsports fame and has been published in countless mags himself. Check out his works.” 


  

15.) Is there anything you would like to say to the world right now to pick them up during this hard time? 


  “My best thought is this..."Yesterday ended last night." Make all you can of each day and share your life with others. Help them along the way and support their dreams. I am truly blessed to be able to do that every day. Yes, I do have down days...believe me. But I choose to get back up and keep going. Practice every day whatever it is you love to do, and you will always be happy! Many thanks to all of you who are in my life and I send blessings and love to you! I look forward to meeting many more people and becoming good friends! My favorite slogan is “If it’s Perfect…It ain’t done by Hand.” God bless you all….all my best, Mark...Fat Daddy” 


       


       Please check out all of Fat Daddy's media pages here: 

                 

                 Instagram.com as/FatDaddyLines, 

                 Pinterest.com as /FatDaddyLines, 

                 Facebook.com/FatDaddyBrand, 

                 Etsy.com/FatDaddyLinesDesigns.

                      _______________________


                THE ART OF MARK "FAT DADDY" HAGSTROM